Your Questions Answered By Our Experts

Why does the coolant leak even after the water pump is repaired?

After the water pump is repaired, the coolant may still leak for a variety of reasons. First, the seals around the water pump may be damaged. These seals prevent coolant from leaking out, so if they are damaged, coolant can easily escape. Second, the gasket that sits between the water pump and the engine may be faulty. This gasket prevents coolant from seeping into the engine, so if it is not functioning properly, coolant can leak out. Finally, the water pump itself may be defective. If the water pump is not pumping properly, coolant can escape from it. In any case, if the coolant is still leaking after the water pump is repaired, it is likely due to one of these three issues.

What Others are Asking

Why do I have a vibration when I turn left at highway speeds?

When driving at highway speeds, you may notice a vibration that seems to come from the front end of the car. This is most likely due to an issue with the tires or wheels. Uneven tire wear can cause a ...

Do I need to press the rear wheel bearing replacement needs pressing or not?

Replacing a rear wheel bearing can be a tricky proposition. If the old bearing is still in good shape, you may be able to simply press it out and press the new one in. However, if the bearing is damag...

After the installation of a new throttle body, does the car's function return to normal?

After the installation of a new throttle body, the car's function will return to normal. The new throttle body will help to regulate the flow of air into the engine and ensure that the engine is opera...

What's the cause of the blinking check engine light blinking?

The check engine light is one of the most important dashboard lights in your car. It's usually illuminated when there's a problem with the car's engine, emissions system, or other critical components....

I put too much oil in my car and now it is smoking. What should I do?

If you put too much oil in your car, the first thing you should do is turn off the engine and let it cool down. Once it has cooled down, you will need to drain the oil and replace it with the correct ...