Your Questions Answered By Our Experts
Why does my car shake when braking at high speeds?
When you brake at high speeds, your car's braking system has to work harder to slow the car down. This can cause the brakes to overheat, which can lead to a condition called "brake fade." When the brakes fade, they lose their ability to slow the car down effectively. This can cause the car to shake. There are several ways to avoid brake fade. First, make sure that your brakes are in good condition and that they are properly serviced. Avoid driving at high speeds for extended periods of time. If you must drive at high speeds, take breaks frequently to allow the brakes to cool down. Finally, if you find that your brakes are beginning to fade, reduce your speed gradually and give the brakes time to recover. By following these simple tips, you can help prevent brake fade and keep your car running smoothly.
What Others are Asking
What is the meaning of OBD-II p1778 code , and what are the possible causes and how to solve this issue?
The OBD-II code P1778 stands for Step Motor Function and indicates that there is an issue in the step motor circuit. This fault can be caused by several issues, such as a shorted or open wire in th...
What is the meaning of OBD-II code P0420, and what is the possible cause of this code being generated?
The OBD-II code P0420 refers to a malfunction in the catalytic converter's efficiency. This code is generated when the Engine Control Module (ECM) detects a discrepancy between the air-fuel ratio sens...
What is the meaning of OBD-II code P0136, and what are the possible causes and solutions for this code?
OBD-II code P0136 refers to a fault in the high voltage of the oxygen sensor circuit, specifically in the sensor located in Bank 1, Sensor 2. The possible causes of this code are: A failing oxygen s...
What is the meaning of OBD-II p1259 code , and what are the possible causes and how to solve this issue?
The OBD-II code P1259 stands for Fuel Pump Control Circuit Range/Performance and indicates that the primary circuit of the fuel pump is not operating in its normal range. This fault can be caused b...
What is the meaning of OBD-II code P0463, and what are the possible causes and solutions for this code to be generated?
The PCM calculates the amount of fuel in the tank using signals with low voltage. Typically, the maximum voltage reading is 5 volts, and if the voltage reading falls outside the normal range establish...