Your Questions Answered By Our Experts
Why does my car pull to the right when shifting and accelerating?
A car's ability to accelerate and shift smoothly is an important part of the driving experience. When a car pulls to the right during these maneuvers, it can be frustrating and even dangerous. It can be that the car's alignment is off, causing the car to veer to one side when accelerating or turning. Or it can happen that one of the tires is low on air pressure. This can also cause the car to pull to one side when accelerating. Finally, a problem with the car's suspension system may be causing the issue. If the suspension doesn't work right, it can cause the car to pull to one side when driving.
What Others are Asking
What is the meaning of OBD-II code P0108, and what are the possible causes and solutions for this code to be generated?
The P0108 is a code for high voltage input in the MAP electrical circuit sensor, which affects the engine's performance by not allowing the ECU to receive proper input from the MAF and TPS. There are...
What is the meaning of OBD-II code P0122, and what are the possible causes and solutions for this code to be generated?
The P0122 code, which is a standard diagnostic code used by OBD-II systems, shows that the Engine Control Module (ECM) has detected a voltage drop below the normal range in the TPS sensor circuit A. ...
What is the meaning of OBD-II p0130 code , and what are the possible causes and how to solve this issue?
OBD-II code P0130 refers to a fault in the oxygen sensor circuit, bank 1 sensor 1. Possible causes for this issue are: Failed oxygen sensor Wiring issues in the oxygen sensor circuit Fuel syst...
What is the meaning of OBD-II code P0506, and what are the possible causes and how to solve this issue?
The OBD-II code P0506 stands for Idle Control System RPM Lower Than Expected and indicates that the engine is idling at a lower RPM than what has been programmed into the ECU. This fault can be cause...
What is the meaning of OBD-II p0405 code , and what are the possible causes and how to solve this issue?
The OBD-II code P0405 stands for Exhaust Gas Recirculation (EGR) Sensor A Circuit Low and indicates that the EGR sensor A has a low voltage output. This fault can be caused by several different iss...