Your Questions Answered By Our Experts

Why does my car not start? I feel the smell of gas when I try it.

When a car does not start, and there is a noticeable gas odor, there are typically two possible explanations. The first possibility is an issue with the fuel system, such as a clogged fuel filter or a faulty fuel pump. In this case, it may be necessary to have the car professionally inspected to identify and resolve the issue. The second possibility is that there is a leak in the fuel line, causing gasoline to leak into the engine compartment and create a strong odor.

What Others are Asking

What is the meaning of OBD-II p0307 code , and what are the possible causes and how to solve this issue?

OBD-II code P0307 refers to a misfire detected in cylinder 7 of the engine. Possible causes for this issue are: Failed spark plug or ignition coil Fuel system issues, such as clogged fuel injec...

P0301 OBD-II Trouble Code; What does it mean?

OBD-II code P0301 indicates a misfire in cylinder number 1. Causes can include faulty spark plugs, a clogged fuel injector, vacuum leaks, a malfunctioning mass air flow sensor, low compression, or iss...

What is the meaning of OBD-II code P0351, and what are the possible causes and solutions for this code?

OBD-II code P0351 refers to a fault with the ignition coil "A" primary/secondary circuit. The possible causes of this code are: A failing ignition coil A damaged spark plug wire A short circuit in t...

What is the meaning of OBD-II code P0325, and what are the possible causes and solutions for this code to be generated?

The P0325 code is related to a knock sensor issue in circuit bank 1. The code triggers the Check Engine Light when the ECU doesn't receive proper information from the knock sensor. There are several p...

What is the meaning of OBD-II code P0741, and what are the possible causes and solutions for this code to be generated?

The PCM sets the P0741 code if the rotational speed difference between the torque converter and transmission input shaft exceeds 200 RPM, indicating a problem with the torque converter clutch circuit....