Your Questions Answered By Our Experts
Why does my car not start, although it has fuel compression and sparks?
Our cars rely on a delicate balance of systems in order to start and run smoothly. While fuel, compression, and sparks are necessary components, there could be an issue with one or more of these elements, as well as other factors. It could be a problem with the fuel pump or the ignition system. Another possibility is that the car's battery is dead or unable to hold a charge. A common issue is dirty spark plugs, causing them to misfire and preventing the engine from starting.
What Others are Asking
What is the meaning of OBD-II code P0463, and what are the possible causes and solutions for this code to be generated?
The PCM calculates the amount of fuel in the tank using signals with low voltage. Typically, the maximum voltage reading is 5 volts, and if the voltage reading falls outside the normal range establish...
What is the meaning of OBD-II code P0171, and what are the possible causes and solutions for this code to be generated?
OBD-II code P0171 refers to a lean condition in the engine's fuel system. A lean condition occurs when there is not enough fuel in the air-fuel mixture and too much air. The Engine Control Module (ECM...
What is the meaning of OBD-II p1133 code chevy , and what are the possible causes and how to solve this issue?
The OBD-II code P1133 stands for HO2S Insufficient Switching Bank 1 Sensor 1 and indicates that there is an issue in the bank 1, sensor 1 circuit of the heated oxygen sensor. This fault can be caus...
What does the OBD-II code P0128 indicate, and what are the possible reasons and solutions for it to be generated?
When the On-Board Diagnostics (OBD) system detects a malfunction in the engine coolant temperature sensor or the engine coolant thermostat, it generates the code P0128. This code is an indication of t...
What is the meaning of OBD-II code P0122, and what are the possible causes and solutions for this code to be generated?
The P0122 code, which is a standard diagnostic code used by OBD-II systems, shows that the Engine Control Module (ECM) has detected a voltage drop below the normal range in the TPS sensor circuit A. ...