Your Questions Answered By Our Experts
What is the meaning of OBD-II p0358 code , and what are the possible causes and how to solve this issue?
The OBD-II code P0358 stands for Ignition Coil 8 Primary/Secondary Circuit Malfunction and indicates that the primary or secondary circuit of the ignition coil has an issue. This fault can be caused by several issues, such as a shorted or open wire in the circuit, a failed ignition coil, a problem with related sensors, or an issue with the ECU. Potential causes of this code may include damaged wiring or connectors in the circuit, a faulty ignition coil, a problem with sensors such as the crankshaft position sensor or mass airflow sensor, and an issue with the ECU. Solutions to this issue may include repairing any damaged wiring in the circuit, replacing any damaged connectors, replacing the ignition coil if it has failed, testing and replacing any sensors that may be causing the issue, and reprogramming or replacing the ECU if necessary.
What Others are Asking
What is the meaning of OBD-II code P0420, and what is the possible cause of this code being generated?
The OBD-II code P0420 refers to a malfunction in the catalytic converter's efficiency. This code is generated when the Engine Control Module (ECM) detects a discrepancy between the air-fuel ratio sens...
Why does my car not start, although it has fuel compression and sparks?
Our cars rely on a delicate balance of systems in order to start and run smoothly. While fuel, compression, and sparks are necessary components, there could be an issue with one or more of these eleme...
What is the meaning of OBD-II p0402 code , and what are the possible causes and how to solve this issue?
OBD-II code P0402 is a generic code that indicates an issue with the Exhaust Gas Recirculation (EGR) system in your vehicle. The code definition is "Excessive EGR Flow". The possible causes for thi...
What is the meaning of OBD-II code P0135, and what are the possible causes and solutions for this code to be generated?
The code P0135 is a generic OBD-II code that indicates an issue with the bank 1 sensor 1 O2 sensor heater circuit. This problem was detected by the engine control module (ECM) during a test of the O2 ...
What is the meaning of OBD-II code P0507, and what are the possible causes and solutions for this code to be generated?
The P0507 code indicates an excessively high RPM in the idle control system, which is outside the allowed range set by the ECU. This triggers a failsafe mode and activates the Check Engine Light on th...