Your Questions Answered By Our Experts
What is the meaning of OBD-II code P0354, and what are the possible causes and how to solve this issue?
OBD-II code P0354 refers to a fault in the ignition coil D primary/secondary circuit. Possible causes for this issue are: Faulty ignition coil Faulty spark plug Wiring issue in the ignition coil circuit Failed PCM or BCM Failed crankshaft position sensor To solve this issue, the following steps should be taken: Verify the fault code with a OBD-II scanner Check for any loose, damaged or corroded wiring in the ignition coil circuit Inspect and replace the spark plug if it is worn or damaged Replace the ignition coil if it is found to be faulty If the problem persists, further diagnosis and repair may be necessary. It's important to note that a professional mechanic should diagnose and repair this issue, as it requires specialized tools and knowledge to safely diagnose and repair the vehicle.
What Others are Asking
What is the meaning of OBD-II code P0506, and what are the possible causes and how to solve this issue?
The OBD-II code P0506 stands for Idle Control System RPM Lower Than Expected and indicates that the engine is idling at a lower RPM than what has been programmed into the ECU. This fault can be cause...
What is the meaning of OBD-II code p0400 , and what are the possible causes and how to solve this issue?
OBD-II code P0400 indicates a problem with the Exhaust Gas Recirculation (EGR) system. This system helps to reduce harmful nitrogen oxides (NOx) emissions in the engine's exhaust. Possible causes o...
Why does my car not start? I feel the smell of gas when I try it.
When a car does not start, and there is a noticeable gas odor, there are typically two possible explanations. The first possibility is an issue with the fuel system, such as a clogged fuel filter or a...
What is the meaning of OBD-II code P0122, and what are the possible causes and solutions for this code to be generated?
The P0122 code, which is a standard diagnostic code used by OBD-II systems, shows that the Engine Control Module (ECM) has detected a voltage drop below the normal range in the TPS sensor circuit A. ...
What is the meaning of OBD-II code P0171, and what are the possible causes and solutions for this code to be generated?
OBD-II code P0171 refers to a lean condition in the engine's fuel system. A lean condition occurs when there is not enough fuel in the air-fuel mixture and too much air. The Engine Control Module (ECM...