Your Questions Answered By Our Experts
P0113 OBD-II Trouble Code; What does it mean?
OBD-II code P0113 is generated when the Engine Control Module (ECM) detects an abnormal reading from the intake air temperature sensor. This sensor measures the temperature of the air entering the engine and is used by the ECM to adjust the air/fuel ratio and ignition timing. The causes for this code can be a faulty intake air temperature sensor or a problem with the sensor's wiring or connector. A mechanic will use a scan tool to diagnose the problem, and the solution may involve replacing the faulty sensor or repairing or replacing the damaged wiring or connector.
What Others are Asking
What is the meaning of OBD-II code P0135, and what are the possible causes and solutions for this code to be generated?
The code P0135 is a generic OBD-II code that indicates an issue with the bank 1 sensor 1 O2 sensor heater circuit. This problem was detected by the engine control module (ECM) during a test of the O2 ...
What is the meaning of OBD-II code P0136, and what are the possible causes and solutions for this code?
OBD-II code P0136 refers to a fault in the high voltage of the oxygen sensor circuit, specifically in the sensor located in Bank 1, Sensor 2. The possible causes of this code are: A failing oxygen s...
What is the meaning of OBD-II code P1101, and what are the possible causes and solutions for this code to be generated?
The P1101 trouble code indicates a voltage discrepancy in the MAF sensor detected by the PCM during a Key On Engine Running test. The test fails when the voltage from the MAF sensor is outside of the ...
What is the meaning of OBD-II code P0175, and what are the possible causes and solutions for this code to be generated?
The P0175 code indicates that the Engine Control Module has detected an imbalance in the air-fuel ratio, where there is too much fuel and not enough oxygen, causing the engine to consume more gas and ...
What is the meaning of OBD-II code P0705, and what are the possible causes and solutions for this code to be generated?
Diagnostic trouble code P0705 indicates a problem with the Transmission Range Sensor (TRS), which tells the Engine Control Module (ECM) or Transmission Control Module (TCM) the position of the shift l...