Chevrolet Cruze Headlight Bulb

Replacing a Headlight Bulb on a Chevrolet Cruze

Daniel McDonald
Daniel McDonald8 min read
Replacing a Headlight Bulb on a Chevrolet Cruze

Replacing a headlight bulb on a Chevrolet Cruze is an easy job that can be done in just a few minutes with basic tools. In this article, we will provide step-by-step instructions to help you replace the headlight bulbs on your own. We'll also provide some useful tips and tricks for making the job easier and faster. So, let's get started!

Park the car on a level surface and turn off the engine

Before you begin any kind of car repairs, it is important to take a few safety precautions. First, park the car on a level surface and turn off the engine. This will help to prevent the car from rolling while you are working on it. Next, be sure to put on gloves and eye protection. This will help to protect you from getting cuts or chemicals on your skin. Finally, make sure that you have all of the tools and parts that you need before you begin. This will help to prevent you from having to stop in the middle of the repair. By following these simple safety tips, you can help to ensure a successful repair job.

Open the hood of the car

Before you open the hood of the car, be sure to disengage the engine by turning off the ignition and setting the parking brake. If the engine is hot, wait for it to cool down before proceeding. Once you have taken these safety precautions, locate the hood release lever inside the vehicle. This is typically located near the steering column or driver's side floorboard. Pull on the hood release lever to pops open the hood. If the hood does not pop open, check to see if there is a secondary release lever under the dash. Once the hood is open, prop it up with the hood prop rod to prevent it from closing. You can now inspect the headlights and other mechanical components of your car.

Locate the headlight assembly - it will be near the front of the car, on either side

Headlights are an essential part of any car, and they need to be in good working order to ensure safe driving at night. The headlight assembly is typically located near the front of the car, on either side. To find it, simply look for the two big round lights that point forward. Once you've found the headlight assembly, you can begin to assess its condition. Check for any cracks or damage to the lens, and make sure that the bulbs are still working. If everything looks good, then your headlights are good to go. However, if you notice any problems, it's best to get them fixed as soon as possible. Driving at night with faulty headlights is dangerous and can lead to accidents. So if you suspect that your headlights might need some work, be sure to take your car to a qualified technician for assessment.

Remove the screws that hold the headlight assembly in place (there may be one or two)

Before you can replace a headlight, you need to remove the old one. This is a relatively simple process that just requires a few tools. First, locate the screws that hold the headlight assembly in place. There may be one or two screws, depending on the model of your car. Once you have found the screws, use a screwdriver to remove them. Be careful not to drop the screws, as they can be difficult to find if they fall into the engine bay. With the screws removed, you should now be able to carefully detach the headlight assembly from the car.

Gently pull on the headlight assembly to remove it from its housing

Once the screws are removed, you can now gently pull on the headlight assembly to remove it from its housing. Be sure not to yank or force it, as this could cause damage to both the headlight and the car. If necessary, you may need to use a thin flathead screwdriver to help pry off the assembly. Once you have removed the headlight assembly, store it in a safe place while you install the new one. By taking these simple steps, you can ensure that your car's headlights will be in good working order for many years to come.

Disconnect the wiring harness from the back of the headlight bulb by pressing down on each tab and pulling it free

Once you've removed the housing, you can access the back of the headlight bulb and disconnect the wiring harness. Once the harness is disconnected, you can unscrew the bulb and replace it with a new one. Just be sure to reconnect the wiring harness before you reinstall the housing. Otherwise, you'll be driving without headlights!


Knowing how to inspect, remove, and replace headlights is an important part of vehicle ownership. Whether you're doing some routine maintenance or upgrading to a new set of lights, the process is relatively straightforward. With these tips, you now have the knowledge to inspect, remove and replace headlights like a pro. So make sure to keep your car in good shape by checking your headlights every once in a while and taking care of any issues promptly. Doing so will help ensure that you are driving safely and responsibly at all times.

Frequently Asked Questions

How do I know if my headlights need to be replaced?

If you notice any cracks or damage to the lens, or if the bulbs are not working properly, then your headlights may need to be replaced. You should also check for any condensation inside the housing or discoloration that could indicate a problem.

What tools do I need to replace my headlights?

You will need a screwdriver and possibly a thin flathead screwdriver in order to remove the headlight assembly from the car. You may also need some replacement screws if necessary.

Are headlights easy to replace?

Yes, replacing headlights is a relatively straightforward process that most people can do on their own. Just be sure to follow the steps outlined above and use caution when working with electrical components.

Can I replace just one Chevy Cruze headlight bulb?

Yes, you can replace just one headlight if necessary. However, it is usually a good idea to replace both headlights at the same time for best results. This will ensure that your car's lighting system is balanced and working properly.

What else should I do after replacing my headlights?

After replacing your headlights, you may want to check the headlight alignment and aim. This can be done by parking your car about 25 feet away from a wall or other flat surface and turning on the low beams. You should then adjust the screws so that the two beams are parallel and pointing slightly downward.

Are there any safety tips to consider when replacing headlights?

Yes, there are some important safety tips to keep in mind when replacing headlights. Be sure to disconnect the wiring harness from the back of the headlight bulb before unscrewing it and always store the old bulbs and the new ones in a safe place.

Should I wear gloves when replacing headlights?

Yes, it is always a good idea to wear gloves when working with electrical components as this can help protect your hands from any sharp edges or debris. You should also be sure to unplug the wiring harness before unscrewing the headlight bulb to avoid electric shocks.

What if I can't get the headlight out?

If you are having difficulty removing a headlight, you may need to consult a professional for assistance. It is also possible that the screws may be stripped or corroded, so it is important to use caution when attempting to unscrew them.

Why is it important to check and replace headlights?

It is important to regularly inspect and replace headlights in order to ensure that your car is both safe and efficient. Damaged or worn-out headlights can lead to poor visibility at night and increase the likelihood of an accident, so it is essential to keep them in good condition.

What kind of bulbs should I use for my headlights?

Most cars require halogen bulbs for the headlights, although some vehicles may use LED or HID bulbs as well. You should always check your owner's manual to make sure that you are using the correct type of bulb for your vehicle.

My Chevrolet Cruze is having issues with its headlights. What should I do?

If your Chevrolet Cruze is having issues with its headlights, you should take it to a qualified mechanic for inspection and repair. They will be able to determine the cause of the issue and recommend the best course of action for fixing it.

​Are there any laws regarding headlight replacement?

In some states, there are laws that require headlights to be replaced at certain intervals or when they have reached a certain age. It is important to check your local laws to make sure that you are in compliance with any headlight requirements.

​If my headlights need replacing, should I do it myself or hire a professional?

It is always a good idea to consult with a professional if you are uncertain about any step of the headlight replacement process. This will help ensure that the job is done correctly and safely. However, if you feel confident in your abilities, then it may be possible to replace the headlights yourself.

Do I need any special tools to replace headlights?

In most cases, no special tools are required when replacing headlights. However, some vehicles may require that you use a screwdriver or wrench to access the bulbs. It is always best to consult with your vehicle's manual to ensure that you have the correct tools before attempting any repairs.

Are LED headlight bulbs more efficient than halogen bulbs?

Yes, LED headlight bulbs are generally more efficient than halogen bulbs. They produce a brighter light that is easier on the eyes and can last up to five times longer. However, LED headlights may be more expensive initially, so it is important to weigh the pros and cons before making your decision.

My new headlights are not working. What should I do?

If your new headlights are not working, the first step is to check the electrical connections and make sure that they have been properly installed. If everything appears to be in order, then you may need to take your vehicle to a professional for further diagnosis and repair.

Can I rewire my headlights myself?

Rewiring headlights is a complex task that should only be attempted by those with significant knowledge of electrical systems. If you are not experienced in this area, it is best to consult a professional for assistance.

​Do I need to replace both headlights at the same time?

It is generally recommended that both headlights be replaced at the same time. This will ensure that they both emit an equally bright light and are balanced in terms of color temperature. Additionally, replacing both headlights at the same time may help save you money on labor costs.

​I am having difficulty removing the screws for my headlight assembly. What should I do?

If you are having difficulty removing the screws for your headlight assembly, it is best to use a screwdriver with the correct size and shape of tip. Additionally, you can apply some penetrating oil onto the threads of the screws to help loosen them up. If all else fails, take your vehicle to a professional for assistance.

Can I reuse my old headlight bulbs?

Reusing old headlight bulbs is not recommended, as they may have worn out or become damaged over time. If you are looking to replace your headlights, it is best to purchase new ones that are designed for your specific vehicle. You should also always check your owner's manual to make sure that you are using the correct bulbs for your vehicle.

Do I need to adjust the headlight angle after replacing the headlights?

Yes, it is recommended that you adjust the angle of the headlights after replacing them in order to ensure that they are pointed in the correct direction. This will help maximize visibility while driving and minimize glare. Consult your owner's manual or a professional to determine the correct angle for your headlights. ​

Do I need to replace my headlight bulbs regularly?

It is recommended that you replace your headlight bulbs when they start to dim or become discolored. This will ensure optimal visibility and safe driving conditions. Additionally, check with your vehicle's manual for the recommended replacement intervals and follow those guidelines.